Оформление и Скриншоты
   1306

Plymouth не работает

не заводится Plymouth с самой установки, читал Арчвики, у меня все так же. Но увы не хочет он работать.
Спойлер!
«System: Host: manjaro Kernel: 4.4.0-2-MANJARO x86_64 (64 bit gcc: 5.3.0) Desktop: MATE 1.12.1 (Gtk 3.18.6) Distro: ManjaroLinux 15.12 Capella Machine: System: ASUS product: All Series Mobo: ASUSTeK model: B85M-K v: Rev X.0x Bios: American Megatrends v: 1003 date: 10/21/2014 CPU: Dual core Intel Core i3-4170 (-HT-MCP-) cache: 3072 KB flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 14773 clock speeds: max: 3700 MHz 1: 3700 MHz 2: 3686 MHz 3: 3414 MHz 4: 3699 MHz Graphics: Card: NVIDIA GF114 [GeForce GTX 560 Ti] bus-ID: 01:00.0 Display Server: X.Org 1.17.4 driver: nvidia Resolution: 1920x1080@60.00hz GLX Renderer: GeForce GTX 560 Ti/PCIe/SSE2 GLX Version: 4.5.0 NVIDIA 352.63 Direct Rendering: Yes Audio: Card-1 Intel 8 Series/C220 Series High Definition Audio Controller driver: snd_hda_intel bus-ID: 00:1b.0 Card-2 NVIDIA GF114 HDMI Audio Controller driver: snd_hda_intel bus-ID: 01:00.1 Sound: Advanced Linux Sound Architecture v: k4.4.0-2-MANJARO Network: Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller driver: r8168 v: 8.040.00-NAPI port: d000 bus-ID: 03:00.0 IF: enp3s0 state: up speed: 100 Mbps duplex: full mac: Drives: HDD Total Size: 500.1GB (36.5% used) ID-1: /dev/sda model: ST500DM002 size: 500.1GB Partition: ID-1: / size: 50G used: 18G (39%) fs: ext3 dev: /dev/sda6 ID-2: /home size: 135G used: 107G (79%) fs: ext4 dev: /dev/sda7 ID-3: swap-1 size: 4.30GB used: 0.00GB (0%) fs: swap dev: /dev/sda8 Sensors: System Temperatures: cpu: 29.8C mobo: 27.8C gpu: 0.0:34C Fan Speeds (in rpm): cpu: 0 Info: Processes: 171 Uptime: 20 min Memory: 2698.3/3895.3MB Init: systemd Gcc sys: 5.3.0 Client: Shell (bash 4.3.421) inxi: 2.2.32

cat /etc/mkinitcpio.conf
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run. Advanced users may wish to specify all system modules
# in this array. For instance:
# MODULES=»piix ide_disk reiserfs"
MODULES=«nouveau»

# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image. This is run last, so it may be used to
# override the actual binaries included by a given hook
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES=""

# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way. This is useful for config files.
FILES=""

# HOOKS
# This is the most important setting in this file. The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added. Run "mkinitcpio -H ' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
## This setup specifies all modules in the MODULES setting above.
## No raid, lvm2, or encrypted root is needed.
# HOOKS=«base»
#
## This setup will autodetect all modules for your system and should
## work as a sane default
# HOOKS=«base udev autodetect block filesystems»
#
## This setup will generate a 'full' image which supports most systems.
## No autodetection is done.
# HOOKS=«base udev block filesystems»
#
## This setup assembles a pata mdadm array with an encrypted root FS.
## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
# HOOKS=«base udev block mdadm encrypt filesystems»
#
## This setup loads an lvm2 volume group on a usb device.
# HOOKS=«base udev block lvm2 filesystems»
#
## NOTE: If you have /usr on a separate partition, you MUST include the
# usr, fsck and shutdown hooks.
HOOKS=«base udev autodetect modconf block filesystems keyboard keymap fsck usr shutdown plymouth»

# COMPRESSION
# Use this to compress the initramfs image. By default, gzip compression
# is used. Use 'cat' to create an uncompressed image.
COMPRESSION=«gzip»
COMPRESSION=«bzip2»
COMPRESSION=«lzma»
COMPRESSION=«xz»
COMPRESSION=«lzop»
COMPRESSION=«lz4»

# COMPRESSION_OPTIONS
# Additional options for the compressor
COMPRESSION_OPTIONS=""
?

clock for blog

2 комментария

avatar
Такая же проблема…
0
avatar
sudo pluma /etc/default/grub
в строку
<code>GRUB_CMDLINE_LINUX_DEFAULT</code>
дописать quite splash, у меня получилось так:
<code>GRUB_CMDLINE_LINUX_DEFAULT="quite splash resume=UUID=381f42ef-c178-48b5-b5b5-fa9adcebed8f"</code>
и обновить граб
<code>sudo update-grub</code>
зы. на мысль навел вот этот коментарий.
?

clock for blog
0
Только зарегистрированные и авторизованные пользователи могут оставлять комментарии.