Manjaro KDE Edition
   345

[Решено] Пожалуйста помогите с vsftpd.

Сделал всё по инструкции manjaro.ru/blog/how-to/smotrim-video-na-android-po-wifi-s-manjaro-linux-cherez-ftp.html
Но не подключается. Заходит в корень читает некоторые папки, но в Домашнюю дерикторию не заходит вообще. Через браузер что-то пытается, но ничего толком не происходит. Совсем недавно вернулся на Manjaro после 3х месяцев использования Mint(была своя необходимость). Мыслей вообще нет… Пожалуйста на арчвики не пинайте, каюсь пробовал но дальше попыток так и не перепрыгнул

8 комментариев

avatar
Манжаро тут не при чем, это ж сторонняя программа. В ней и проблемы.
Ну, для начала, там в инструкции пропущен автозапуск сервера, запустите sudo systemctl enable vsftpd
Потом надо понять чего там вообще за проблема. Браузер ошибок не показывает, поэтому поставьте клиент FTP, например pacman -S gftp Запускайте его и пробуйте подключиться, внизу будет показан весь процесс подключения, все действия и ошибки. Из этого уже можно будет понять, что происходит и где копать.
ЗЫ: Скорее всего это опять как всегда права доступа.
Последний раз редактировалось
?
Правильные ответы начинаются с правильных вопросов.
0
avatar
sudo systemctl enable vsftpd — делал, я знаю про автозапуск, даже вначале делал umask.
Запускал с xinetd (И без него)
После всех шамантсв manjaro.ru/blog/how-to/smotrim-video-na-android-po-wifi-s-manjaro-linux-cherez-ftp.html указанных здесь ничего не происходит, пускает только в корень. Пробовал ES ftp. И через браузер на ноутбуке(самом сервере)
0
avatar
Это я всё понял, толку с этой информации мало. Вы gftp поставьте на ноутбук (сам сервер) и подключитесь локально, посмотрите ошибки подключения.
?
Правильные ответы начинаются с правильных вопросов.
0
avatar
одключение к 192.168.1.112:21
220 (vsFTPd 3.0.3)
USER alex
331 Please specify the password.
PASS xxxx
230 Login successful.
SYST
215 UNIX Type: L8
TYPE I
200 Switching to Binary mode.
CWD /home/alex
250 Directory successfully changed.
PWD
257 "/home/alex" is the current directory
Загрузка списка файлов каталога /home/alex с сервера (LC_TIME=ru_RU.UTF-8)
PASV
227 Entering Passive Mode (192,168,1,112,179,205).
LIST -aL
150 Here comes the directory listing.
В столбце(вкладке) фтп пустота....
Последний раз редактировалось
0
avatar
Покажите вывод
cat /etc/vsftpd.conf
cat /etc/fstab
?
Правильные ответы начинаются с правильных вопросов.
0
avatar
Спойлер!
vsftpd.conf
# Example config file /etc/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
# capabilities.
#
# Allow anonymous FTP? (Beware — allowed by default if you comment this out).
anonymous_enable=NO
#
# Uncomment this to allow local users to log in.
local_enable=YES
#
# Uncomment this to enable any form of FTP write command.
write_enable=YES
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
local_umask=022
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
anon_upload_enable=YES
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
anon_mkdir_write_enable=YES
#
# Activate directory messages — messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES
#
# Activate logging of uploads/downloads.
xferlog_enable=YES
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using «root» for uploaded files is not
# recommended!
chown_uploads=YES
chown_username=alex
#
# You may override where the log file goes if you like. The default is shown
# below.
xferlog_file=/var/log/vsftpd.log
#
# If you want, you can have your log file in standard ftpd xferlog format.
# Note that the default log file location is /var/log/xferlog in this case.
xferlog_std_format=YES
#
# You may change the default value for timing out an idle session.
idle_session_timeout=600
#
# You may change the default value for timing out a data connection.
data_connection_timeout=120
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
nopriv_user=ftpsecure
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that on some FTP servers, ASCII support allows a denial of service
# attack (DoS) via the command «SIZE /big/file» in ASCII mode. vsftpd
# predicted this attack and has always been safe, reporting the size of the
# raw file.
# ASCII mangling is a horrible feature of the protocol.
ascii_upload_enable=YES
ascii_download_enable=YES
#
# You may fully customise the login banner string:
ftpd_banner=Welcome to blah FTP service.
#
# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
deny_email_enable=YES
# (default follows)
banned_email_file=/etc/vsftpd.banned_emails
#
# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
# (Warning! chroot'ing can be very dangerous. If using chroot, make sure that
# the user does not have write access to the top level directory within the
# chroot)
chroot_local_user=YES
chroot_list_enable=YES
# (default follows)
chroot_list_file=/etc/vsftpd.chroot_list
#
# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as «ncftp» and «mirror» assume
# the presence of the "-R" option, so there is a strong case for enabling it.
ls_recurse_enable=YES
#
# When «listen» directive is enabled, vsftpd runs in standalone mode and
# listens on IPv4 sockets. This directive cannot be used in conjunction
# with the listen_ipv6 directive.
listen=YES
#
# This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6
# sockets, you must run two copies of vsftpd with two configuration files.
# Make sure, that one of the listen options is commented!!!
listen_ipv6=YES


fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a device; this may
# be used with UUID= as a more robust way to name devices that works even if
# disks are added and removed. See fstab(5).
#
# UUID=8BCD-C43C /boot/efi vfat defaults,noatime 0 2
UUID=59685a99-47ea-4af9-98b3-b2755449e2a1 swap swap defaults,noatime 0 0
UUID=010dfc45-0d03-417b-8295-6d305da20be2 /boot ext4 defaults,noatime 0 2
UUID=88f1e2b3-4abf-488c-8c71-e37a9e9be853 / ext4 defaults,noatime 0 1
UUID=b6e8b2a4-9b59-47b0-a5ad-a5d92cce5808 /home ext4 defaults,noatime 0 2
/home/alex /srv/ftp none defaults,bind 0
0
Последний раз редактировалось
0
avatar
Вы вообще ВСЕ опции в vsftpd.conf раскомментировали что-ли? Зачем?
Я настраивал по другому мануалу: interface31.ru/tech_it/2016/01/nastraivaem-ftp-server-s-virtual-nymi-pol-zovatelyami-na-baze-vsftpd.html
Все работает. Мой конфиг:
Спойлер!
Example config file /etc/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd«s
# capabilities.
#
# Allow anonymous FTP? (Beware — allowed by default if you comment this out).
anonymous_enable=NO
#
# Uncomment this to allow local users to log in.
local_enable=YES
#
# Uncomment this to enable any form of FTP write command.
write_enable=YES
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd"s)
local_umask=022
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
# anon_upload_enable=YES
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
# anon_mkdir_write_enable=YES
#
# Activate directory messages — messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES
#
# Activate logging of uploads/downloads.
xferlog_enable=YES
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using «root» for uploaded files is not
# recommended!
chown_uploads=YES
chown_username=whoever
#
# You may override where the log file goes if you like. The default is shown
# below.
xferlog_file=/var/log/vsftpd.log
#
# If you want, you can have your log file in standard ftpd xferlog format.
# Note that the default log file location is /var/log/xferlog in this case.
xferlog_std_format=YES
#
# You may change the default value for timing out an idle session.
idle_session_timeout=600
#
# You may change the default value for timing out a data connection.
data_connection_timeout=120
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
nopriv_user=ftpsecure
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that on some FTP servers, ASCII support allows a denial of service
# attack (DoS) via the command «SIZE /big/file» in ASCII mode. vsftpd
# predicted this attack and has always been safe, reporting the size of the
# raw file.
# ASCII mangling is a horrible feature of the protocol.
ascii_upload_enable=YES
ascii_download_enable=YES
#
# You may fully customise the login banner string:
ftpd_banner=Welcome to blah FTP service.
#
# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
deny_email_enable=YES
# (default follows)
banned_email_file=/etc/vsftpd.banned_emails
#
# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
# (Warning! chroot'ing can be very dangerous. If using chroot, make sure that
# the user does not have write access to the top level directory within the
# chroot)
chroot_local_user=YES
chroot_list_enable=YES
# (default follows)
chroot_list_file=/etc/vsftpd.chroot_list
#
# You may activate the „-R“ option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as «ncftp» and «mirror» assume
# the presence of the „-R“ option, so there is a strong case for enabling it.
ls_recurse_enable=YES
#
# When «listen» directive is enabled, vsftpd runs in standalone mode and
# listens on IPv4 sockets. This directive cannot be used in conjunction
# with the listen_ipv6 directive.
listen=YES
#
# This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6
# sockets, you must run two copies of vsftpd with two configuration files.
# Make sure, that one of the listen options is commented!!!
listen_ipv6=YES

seccomp_sandbox=NO


В fstab ничего не монтировал, юзерлист тоже не настраивал. Мне незачем.
Последний раз редактировалось
?
Правильные ответы начинаются с правильных вопросов.
+1
avatar
Спасибо за ресурс и конфиг.
Использовал ваш конфиг, (сначала не стал заморачиваться, так как времени уже много потратил) немного поправил под себя. И теперь ВУАЛЯ
ПРОБЛЕМА РЕШЕНА.
0
Только зарегистрированные и авторизованные пользователи могут оставлять комментарии.