Уголок новичка
   233

Система не видит принтер

Здравствуйте.
При выводе документа на печать система выдает «Печатать в файл».
При этом принтер подключен

Уголок новичка: Система не видит принтер

Уголок новичка: Система не видит принтер

драйвер gutenprint установлен, кроме того, установлены следующие пакеты

Уголок новичка: Система не видит принтер

Лог-файлы читать не способен — интуитивно зашел сюда: /var/log/cups/error_log
============================================================
D [04/Jul/2017:19:00:01 +0300] [Job 9] Gutenprint: VVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVV
D [04/Jul/2017:19:00:01 +0300] [Job 9] Gutenprint: 5.2.12 Starting
D [04/Jul/2017:19:00:01 +0300] [Job 9] Gutenprint: command line: Canon_MP250_series \'9\' \'valery\' \'Test Page\' \'1\' D [04/Jul/2017:19:00:01 +0300] [Job 9] Gutenprint: using PPD file /etc/cups/ppd/Canon_MP250_series.ppd
D [04/Jul/2017:19:00:01 +0300] [Job 9] Set job-printer-state-message to «The PPD version (5.2.11) is not compatible with Gutenprint 5.2.12. Please run `/usr/bin/cups-genppdupdate\' as administrator.», current level=ERROR
D [04/Jul/2017:19:00:01 +0300] [Job 9] Gutenprint: If you have upgraded your version of Gutenprint
D [04/Jul/2017:19:00:01 +0300] [Job 9] Gutenprint: recently, you must reinstall all printer queues.
D [04/Jul/2017:19:00:01 +0300] [Job 9] Gutenprint: If the previous installed version of Gutenprint
D [04/Jul/2017:19:00:01 +0300] [Job 9] Gutenprint: was 5.0.0 or higher, you can use the `cups-genppdupdate\'
D [04/Jul/2017:19:00:01 +0300] [Job 9] Gutenprint: program to do this; if the previous installed version
D [04/Jul/2017:19:00:01 +0300] [Job 9] Gutenprint: was older, you can use the Modify Printer command via
D [04/Jul/2017:19:00:01 +0300] [Job 9] Gutenprint: the CUPS web interface: localhost:631/printers.
D [04/Jul/2017:19:00:01 +0300] [Job 9] Sent 0 bytes…
D [04/Jul/2017:19:00:01 +0300] [Job 9] PID 959 (/usr/lib/cups/filter/rastertogutenprint.5.2) stopped with status 1.
D [04/Jul/2017:19:00:01 +0300] [Job 9] Hint: Try setting the LogLevel to «debug» to find out more.
D [04/Jul/2017:19:00:01 +0300] [Job 9] Error: /ioerror in --showpage--
D [04/Jul/2017:19:00:01 +0300] [Job 9] Operand stack:
D [04/Jul/2017:19:00:01 +0300] [Job 9] (/var/spool/cups/tmp/gs_vQO2Eh) --nostringval-- 1 true
D [04/Jul/2017:19:00:01 +0300] [Job 9] Execution stack:
D [04/Jul/2017:19:00:01 +0300] [Job 9] %interp_exit .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 %stopped_push --nostringval-- --nostringval-- --nostringval-- false 1 %stopped_push 2003 1 3 %oparray_pop 2002 1 3 %oparray_pop 1986 1 3 %oparray_pop --nostringval-- --nostringval-- --nostringval-- 2 1 1 --nostringval-- %for_pos_int_continue --nostringval-- --nostringval-- 1874 2 9 %oparray_pop --nostringval-- --nostringval--
D [04/Jul/2017:19:00:01 +0300] [Job 9] Dictionary stack:
D [04/Jul/2017:19:00:01 +0300] [Job 9] --dict:1222/1684(ro)(G)-- --dict:1/20(G)-- --dict:83/200(L)-- --dict:83/200(L)-- --dict:137/256(ro)(G)-- --dict:298/300(ro)(G)-- --dict:32/32(L)-- --dict:6/9(L)-- --dict:27/40(L)--
D [04/Jul/2017:19:00:01 +0300] [Job 9] Current allocation mode is local
D [04/Jul/2017:19:00:01 +0300] [Job 9] Last OS error: Broken pipe
D [04/Jul/2017:19:00:01 +0300] [Job 9] GPL Ghostscript 9.21: Unrecoverable error, exit code 1
D [04/Jul/2017:19:00:01 +0300] [Job 9] Rendering completed
D [04/Jul/2017:19:00:01 +0300] [Job 9] Waiting for read thread to exit…
D [04/Jul/2017:19:00:01 +0300] [Job 9] PID 958 (/usr/lib/cups/filter/gstoraster) stopped with status 1.
D [04/Jul/2017:19:00:01 +0300] [Job 9] Hint: Try setting the LogLevel to «debug» to find out more.
D [04/Jul/2017:19:00:01 +0300] [Job 9] PID 960 (/usr/lib/cups/backend/usb) exited with no errors.
D [04/Jul/2017:19:00:01 +0300] [Job 9] End of messages
D [04/Jul/2017:19:00:01 +0300] [Job 9] printer-state=3(idle)
D [04/Jul/2017:19:00:01 +0300] [Job 9] printer-state-message=«Rendering completed»
D [04/Jul/2017:19:00:01 +0300] [Job 9] printer-state-reasons=none
E [04/Jul/2017:19:01:52 +0300] Unknown directive JobPrivateAccess on line 90 of /etc/cups/cupsd.conf.
E [04/Jul/2017:19:01:52 +0300] Unknown directive JobPrivateValues on line 91 of /etc/cups/cupsd.conf.
E [04/Jul/2017:19:01:52 +0300] Unknown directive SubscriptionPrivateAccess on line 92 of /etc/cups/cupsd.conf.
E [04/Jul/2017:19:01:52 +0300] Unknown directive SubscriptionPrivateValues on line 93 of /etc/cups/cupsd.conf.
W [04/Jul/2017:19:01:53 +0300] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
W [04/Jul/2017:19:01:53 +0300] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
W [04/Jul/2017:19:01:53 +0300] CreateDevice failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
Прошу совета -как поступить?
Спасибо.

9 комментариев

avatar
В АУРе есть пакет, имеющий отношение к данному устройству: cnijfilter-mp250. Попробуйте его.
Последний раз редактировалось
0
avatar
Gambit_VKM
Спасибо.Не помогло.
0
avatar
Я так понимаю, что LO принтер видит! А часть программ нет. Правильно?
0
avatar
Вики
От админа запусти:

# /usr/sbin/cups-genppdupdate

Или в вебморде переустанови
0
avatar
Geramoto
Запустил.
Получил
/etc/cups/ppd/Canon_MP250_series.ppd: no valid candidate for replacement. Skipping
/etc/cups/ppd/Canon_MP250_series.ppd: please upgrade this PPD manually
Unable to retrieve PPD file for /etc/cups/ppd/Canon_MP250_series.ppd!
Failed to update any PPD files
О чём это сообщение?
Строка про вебморду осталась нерасшифрованной.
0
avatar
Строка про вебморду осталась нерасшифрованной.
У CUPS есть веб-интерфейс. Попасть в него можно, открыв в браузере адрес localhost:631.
0
avatar
Посмотри, возможно не установлен пакет gtk3-print-backends? У меня в свое время была проблема именно в этом…
+1
avatar
Спасибо тебе мил человек!
0
avatar
vasco
Спасибо.
После установки gtk3-print-backends система принтер увидела



но собственно печати не происходит.
выдержка из error_log:
D [05/Jul/2017:21:27:14 +0300] [Job 12] Gutenprint: VVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVV
D [05/Jul/2017:21:27:14 +0300] [Job 12] Gutenprint: 5.2.12 Starting
D [05/Jul/2017:21:27:14 +0300] [Job 12] Gutenprint: command line: Canon_MP250_series \'12\' \'valery\' \'Deti-Online.com\' \'1\' D [05/Jul/2017:21:27:14 +0300] [Job 12] Gutenprint: using PPD file /etc/cups/ppd/Canon_MP250_series.ppd
D [05/Jul/2017:21:27:14 +0300] [Job 12] Set job-printer-state-message to «The PPD version (5.2.11) is not compatible with Gutenprint 5.2.12. Please run `/usr/bin/cups-genppdupdate\' as administrator.», current level=ERROR
D [05/Jul/2017:21:27:14 +0300] [Job 12] Gutenprint: If you have upgraded your version of Gutenprint
D [05/Jul/2017:21:27:14 +0300] [Job 12] Gutenprint: recently, you must reinstall all printer queues.
D [05/Jul/2017:21:27:14 +0300] [Job 12] Gutenprint: If the previous installed version of Gutenprint
D [05/Jul/2017:21:27:14 +0300] [Job 12] Gutenprint: was 5.0.0 or higher, you can use the `cups-genppdupdate\'
D [05/Jul/2017:21:27:14 +0300] [Job 12] Gutenprint: program to do this; if the previous installed version
D [05/Jul/2017:21:27:14 +0300] [Job 12] Gutenprint: was older, you can use the Modify Printer command via
D [05/Jul/2017:21:27:14 +0300] [Job 12] Gutenprint: the CUPS web interface: localhost:631/printers.
D [05/Jul/2017:21:27:14 +0300] [Job 12] Sent 0 bytes…
D [05/Jul/2017:21:27:14 +0300] [Job 12] PID 1674 (/usr/lib/cups/filter/rastertogutenprint.5.2) stopped with status 1.
D [05/Jul/2017:21:27:14 +0300] [Job 12] Hint: Try setting the LogLevel to «debug» to find out more.
D [05/Jul/2017:21:27:14 +0300] [Job 12] Error: /ioerror in --showpage--
D [05/Jul/2017:21:27:14 +0300] [Job 12] Operand stack:
D [05/Jul/2017:21:27:14 +0300] [Job 12] (/var/spool/cups/tmp/gs_pWZVA9) --nostringval-- 1 true
D [05/Jul/2017:21:27:14 +0300] [Job 12] Execution stack:
D [05/Jul/2017:21:27:14 +0300] [Job 12] %interp_exit .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 %stopped_push --nostringval-- --nostringval-- --nostringval-- false 1 %stopped_push 2003 1 3 %oparray_pop 2002 1 3 %oparray_pop 1986 1 3 %oparray_pop --nostringval-- --nostringval-- --nostringval-- 2 1 1 --nostringval-- %for_pos_int_continue --nostringval-- --nostringval-- 1874 2 9 %oparray_pop --nostringval-- --nostringval--
D [05/Jul/2017:21:27:14 +0300] [Job 12] Dictionary stack:
D [05/Jul/2017:21:27:14 +0300] [Job 12] --dict:1222/1684(ro)(G)-- --dict:1/20(G)-- --dict:83/200(L)-- --dict:83/200(L)-- --dict:137/256(ro)(G)-- --dict:298/300(ro)(G)-- --dict:32/32(L)-- --dict:6/9(L)-- --dict:23/40(L)--
D [05/Jul/2017:21:27:14 +0300] [Job 12] Current allocation mode is local
D [05/Jul/2017:21:27:14 +0300] [Job 12] Last OS error: Broken pipe
D [05/Jul/2017:21:27:14 +0300] [Job 12] GPL Ghostscript 9.21: Unrecoverable error, exit code 1
D [05/Jul/2017:21:27:14 +0300] [Job 12] Rendering completed
D [05/Jul/2017:21:27:14 +0300] [Job 12] Waiting for read thread to exit…
D [05/Jul/2017:21:27:14 +0300] [Job 12] PID 1673 (/usr/lib/cups/filter/gstoraster) stopped with status 1.
D [05/Jul/2017:21:27:14 +0300] [Job 12] Hint: Try setting the LogLevel to «debug» to find out more.
D [05/Jul/2017:21:27:14 +0300] [Job 12] PID 1675 (/usr/lib/cups/backend/usb) exited with no errors.
D [05/Jul/2017:21:27:14 +0300] [Job 12] End of messages
D [05/Jul/2017:21:27:14 +0300] [Job 12] printer-state=3(idle)
D [05/Jul/2017:21:27:14 +0300] [Job 12] printer-state-message=«Rendering completed»
D [05/Jul/2017:21:27:14 +0300] [Job 12] printer-state-reasons=none.
что посоветуете?
0
Только зарегистрированные и авторизованные пользователи могут оставлять комментарии.